Setting Items To [User Menu] And Loading/Reading The Settings To A Data File - Panasonic AJ-PX5100G Operating Instructions Manual

[NETWORK SEL] (page 187)
[LAN PROPERTY]
[WIRELESS PROPERTY]
[4G/LTE PROPERTY]
[NETWORK TOOLS]
[OPTION]
Item
[ENG SECURITY]
[FAN MODE]
[AREA SETTING]
Item
[AREA SELECT]

Setting items to [USER MENU] and loading/reading the settings to a data file

Setting items to [USER MENU]
f Indicates whether items that can be set to [USER MENU] can be set by page or by item.
l: Items that can be set to [USER MENU] (items that are not selected in factory settings)
Chapter 6 Menu Operations — Menu list
Item
[MAC ADDRESS] (page 188)
[DHCP] (page 188)
[IP ADDRESS] (page 188)
[SUBNET MASK] (page 188)
[DEFAULT GATEWAY] (page 188)
[PRIMARY DNS] (page 188)
[SECONDARY DNS] (page 188)
[DHCP SERVER] (page 189)
[MAC ADDRESS] (page 189)
[TYPE] (page 189)
[SSID INPUT MODE] (page 189)
[SSID] (page 189)
[BAND] (page 189)
[CHANNEL (2.4GHz)] (page 189)
[CHANNEL (5GHz)] (page 189)
[ENCRYPTION] (page 189)
[ENCRYPT KEY] (page 189)
[DHCP] (page 189)
[IP ADDRESS] (page 189)
[SUBNET MASK] (page 189)
[DEFAULT GATEWAY] (page 189)
[PRIMARY DNS] (page 189)
[SECONDARY DNS] (page 189)
[DHCP SERVER] (page 189)
[APN] (page 189)
[USER ID] (page 189)
[PASSWORD] (page 189)
[DIAL NO.] (page 189)
[LOG DISPLAY] (page 189)
[STATUS DISPLAY] (page 189)
[INITIALIZE] (page 189)
[PING] (page 189)
Selects whether to place restrictions on opening and closing the menu screen.
[ON]: Disables opening of menu items other than [USER MENU]. To release, consult your dealer.
[OFF]: Opening and closing are not restricted.
f Factory setting: [OFF]
Sets the fan operation mode.
[AUTO]: If the camera internal temperature rises, the fan will automatically rotate.
[OFF]: The fan does not rotate at all times. The warning [FAN STOPPED] is displayed.
f Factory setting: [AUTO]
Once the power is turned off, this item is always set to [AUTO] the next time power is turned on. If
operation continues while the fan is stopped, the internal temperature of the camera rises and it may not
be able to record or play back normally. Normally, use the camera in [AUTO].
Select the region in which to use the camera before the initial use.
[NTSC]: Selects an NTSC region other than Japan.
[NTSC (J)]: Selects Japan.
[PAL]: Selects the PAL region.
f Factory setting: [NTSC]
For details, refer to "Setting the region of use (setting frame frequency, etc.)" (page 13).
– 198 –
[STREAMING LATENCY] (page 180)
Description of settings
Description of settings