Removing The Microsd Card; D Removing While The Transceiver Is Off; D Removing While The Transceiver Is On - Icom ID-52A Basic Manual

■ Removing the microSD card

D Removing while the transceiver is OFF

1. Turn OFF the transceiver.
2. Open the [microSD] slot cover.
3. Push in the microSD card until a 'click' sounds, and
then carefully pull it out.
L DO NOT touch the terminals.
4. Completely close the [microSD] slot cover.

D Removing while the transceiver is ON

[MENU] > SET > SD Card > Unmount
1. Push [MENU].
2. Select "SD Card" in the "SET" menu.
3. Select "Unmount."
• The confirmation dialog is displayed.
4. Select "YES."
• When the unmounting is completed, "Unmount is completed." is briefly displayed, then
the display automatically returns to the SD CARD screen.
5. Push in the microSD card until a 'click' sounds, and then carefully pull it out.
L See "Removing while the transceiver is OFF" for details.
6. Completely close the [microSD] slot cover.
NOTE: After removing the microSD card, completely
close the [microSD] slot cover as shown to the right.
RECORDING A QSO ONTO A microSD CARD
Push in
Slot cover
Pull out
Close the slot cover firmly
YES NO
6
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
28