Icom ID-52A Basic Manual page 59

How to enter characters:
Cancels
Moves the cursor to the left
• Continuously holding down [CLR] clears characters.
• Push [QUICK] to display the Entry Mode Select window.*
In the Entry Mode Select window, rotate [DIAL] to select an entry mode, then push [ENT].
* You cannot change the entry mode in the MY CALL SIGN edit screen.
TIP: You can enter a note of up to 4 characters, such as the model of the transceiver,
name, area name, after your call sign.
1. After entering a call sign, push D-pad() several times until the cursor moves to
the right of the "/."
2. Enter a 4 character note. (Example: ID52)
[ENT] Selects a Opens the Entry Select window*
Sets character
INTRODUCTION
[DIAL] (Rotate)
Selects a character
Selects a character
Clears
Moves the cursor to the right
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
46