Condenser Turret: Components - Accu-Scope EXI-600 Manual

6.1.3. Condenser turret: Components

6-position condenser turret
B : Brightfield
Ph1 : Phase contrast for 10X/20X
phase contrast objectives
Ph2 : Phase contrast for 40X
phase contrast objective
Ph3/L : Phase contrast position for
60X (Ph3) or 4X (PhL) phase
contrast objective (only supports
one phase annulus)
DIC : Differential Interference
Contrast for 10X objective
DIC II : Differential interference
Contrast for 20X/40X/60X
objectives.
Adjust the aperture diaphragm by
rotating the condenser diaphragm
wheel.

The condenser aperture diaphragm
is adjustable ONLY when the
condenser turret is in the B, DIC
and DIC II positions. The aperture
is automatically fully open
("auto-iris" feature) for Ph1, Ph2
and Ph3/L positions and cannot
be adjusted.
Change to another position on the
condenser turret by rotating the
turret rotation wheel. Rotate until
the desired position faces front
(i.e., B for brightfield).
ACCU-SCOPE ®
73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com
EXI-600 INVERTED MICROSCOPE SERIES
Phase annulus
centering screw
Condenser diaphragm
Turret rotation wheel
25