Introduction; Unpacking And Components Diagrams - Accu-Scope 3000-LED-SPH Manual

3000-LED MICROSCOPE SERIES

INTRODUCTION

Congratulations on the purchase of your new ACCU-SCOPE ® microscope. ACCU-SCOPE ®
microscopes are engineered and manufactured to the highest quality standards. Your microscope will
last a lifetime if used and maintained properly. ACCU-SCOPE microscopes are carefully assembled,
®
inspected and tested by our staff of trained technicians in our New York facility. Careful quality control
procedures ensure each microscope is of the highest quality prior to shipment.
UNPACKING AND COMPONENTS
Your microscope arrived packed in a molded Styrofoam container. Do not discard the container: the
Styrofoam container should be retained for reshipment of your microscope if needed. Avoid placing the
microscope in dusty surroundings or in high temperature or humid areas as mold and mildew will form.
Carefully remove the microscope from the Styrofoam container by its arm and base and place the
microscope on a flat, vibration-free surface.
COMPONENTS DIAGRAM
Binocular Head Eyepiece
Arm
Tension
Adjustment
Objective
Knob
Stage
Coarse
Focusing
Condenser
Knob
Focus Block
Illuminator
Fine Focusing Light Adjustment
Housing
Knob Knob
ACCU-SCOPE ®
4