Introduction; Unpacking And Components - Accu-Scope EXC-500 Manual

Fluorescence microscope system

Hide thumbs Also See for EXC-500:

Table of Contents

EXC-500 FLUORESCENCE MICROSCOPE SYSTEM

INTRODUCTION

Congratulations on the purchase of your new ACCU-SCOPE

fluorescent microscope. ACCU-SCOPE

microscopes are engineered and manufactured to the highest quality standards. Your microscope will

last a lifetime if used and maintained properly. ACCU-SCOPE

microscopes are carefully assembled,

inspected and tested by our staff of trained technicians in our New York facility. Careful quality control

procedures ensure each microscope is of the highest quality prior to shipment.

Your microscope arrived packed in a molded Styrofoam container. Do not discard the container: the

Styrofoam container should be retained for reshipment of your microscope if needed. Avoid placing the

microscope in dusty surroundings or in high temperature or humid areas as mold and mildew will form.

Carefully remove the microscope from the Styrofoam container by its arm and base and place the

microscope on a flat, vibration-free surface.

ACCU-SCOPE

73 Mall Drive, Commack, NY 11725 • 631-864-1000 • www.accu-scope.com

Table of Contents