I Controls (Cont'd); Lh Brake Lever; Brake Lock - Can-Am 570 Series Operator's Manual

2) LH Brake Lever

The LH brake lever is located on the LH
side of the handlebar.
vmo2012-006-002_b
TYPICAL
1. Brake lever
2. To apply brakes
The brake lever function is to slow
down or stop the vehicle.
When the brake lever is compressed,
the front and rear brakes are applied.
Braking effect is proportional to the
force applied on the lever.

3) Brake Lock

The brake lock is located on the LH side
of the handlebar.
The brake lock function is to apply
brake to all wheels to prevent vehi-
cle from moving when parked.
WARNING
Always use the brake lock and en-
gage the PARK position on the shift
lever when the vehicle is not in op-
eration.
To engage brake lock: Squeeze brake
lever and maintain while moving lever
lock. Brake lever is now compressed
and applying all brakes.
vmo2012-006-002_c
TYPICAL
1. Brake lever lock
2. Press to apply brake locks
NOTE: Locking lever can be adjusted
in several positions.
NOTICE
lock is applied that the vehicle stays
securely in place.
To release brake lock: Squeeze brake
lever. Lever lock should automatically
return to its original position. Brake
lever should return to rest position.
Make sure brake lock is released
before operating the vehicle. If
brake lock is left ON while riding,
it may cause damage to the brake
system and cause loss of braking
capacity and/or fire.
_______________
Ensure when the brake
WARNING
I CONTROLS
79