Table of Contents

Advertisement

Chapter 2 - ManagementSystem Tab
Chapter 2 - Management
NOTE!
If the radio card is changed from an 802.11ac card to a non-802.11ac card, perform a reset. This is
because the configuration for the radio cards are different.
Restore backup: Upload archive: Lets you upload a previously generated backup archive to restore
configuration files.
2.2.6.2
Flash New Firmware
You can upload a new firmware to replace the currently running firmware.
Keep settings: Retains the current configuration.
Firmware: Shows the current version of the firmware and allows you to upload a new firmware.
2.2.7

Reboot

Perform reboot: Reboots the operating system of your device. This is similar to the power-off and
power-on cycle. The system configuration remains the same. Any changes that are not applied are lost.
WBSIac Access Point User Ma n ua l
Figure 2-41: Flash New Firmware
System Tab
32

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wbsiac-2450-unWbsiac-2450-euWbsiac-2450-us

Table of Contents