Chapter 2 - Management
2.4.9.1
General Settings
The firewall creates zones over the network interfaces to control network traffic flow.
The Network > Firewall > General Settings page contains the zone settings.
Enable SYN-flood protection: Checked by default.
Drop invalid packets: Unchecked by default.
Input: To accept by default.
Output: To accept by default.
Forward: To reject by default.
2.4.9.1.1
Zones
Zone > Forwardings
Input
Output
Forward
Masquerading
MSS Clamping
Edit
Delete
Add
WBSIac Access Point User Ma n ua l
Figure 2-92: Firewall - General Settings
Figure 2-93: Default Settings for the Firewall Zones
Network Tab
73