Table of Contents

Advertisement

Chapter 2 - Management
2.2.3

Services

In the System > Services page, you can configure the Ping Watchdog and the Auto Reboot.
2.2.3.1
Ping Watchdog
Ping Watchdog: Configures the device to ping to a remote IP address and reboot if the connection is
lost. It is disabled by default.
IP Address to Ping: Sets the remote IP address to ping, e.g., 192.168.1.10 or 8.8.8.8.
Ping Interval: Specifies the time between successive pings, the default being 5 seconds.
Startup Delay: Sets the time delay after the WBSIac AP finishes rebooting, before running the Ping
Watchdog, the default being 60 seconds.
Failure Count to Reboot: Specifies the number of failed pings before the WBSIac AP reboots
automatically.
WBSIac Access Point User Ma n ua l
Figure 2-32: System > Services Page
Figure 2-33: Ping Watchdog
System Tab
27

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wbsiac-2450-unWbsiac-2450-euWbsiac-2450-us

Table of Contents