Table of Contents

Advertisement

Chapter 2 - Management
2.4.6.3
VLAN Ethernet Trunk
The VLAN Ethernet Trunk uses a wireless network as a trunk link to connect physically separate VLANs
having the same VLAN ID.
Within the subsection for the VLAN Ethernet Trunk Entries, each row represents one VLAN ID.
Add: Inserts a new row corresponding to a new VLAN. The IP address field should be distinct for
different devices.
Ethernet Trunk VLAN ID: Sets the VLAN ID of the separate VLANs to connect.
Priority: Chooses the priority for transmitting packets. This is a number from 0 to 7. The number 7
represents the highest priority.
Bridge WIFI: Selects the wireless network that would act as a trunk link.
2.4.7

Hostnames

In the Network > Hostnames page, you can specify custom hostnames (URLs) with their respective IP
addresses. This is an additional local DNS.
The computers in the same subnet need to set the IP address of this device as their preferred DNS
NOTE!
server in order to interpret these custom hostnames.
WBSIac Access Point User Ma n ua l
Figure 2-88: VLAN Entries in the VLAN Ethernet Trunk Section
Figure 2-89: Custom Hostname Entries
Network Tab
71

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wbsiac-2450-unWbsiac-2450-euWbsiac-2450-us

Table of Contents