Alvarion WBSIac User Manual page 63

Chapter 2 - Management
2.4.4.2 Spectrum: Interference Analyzer
For a radio in AP mode, clicking the Spectrum button would bring up the Channel Scan Report.
The Radio 1 View button shows the number of neighboring access points for each channel, the Min
RSSI, Max RSSI, Noise Floor, and Channel Load.

Min RSSI: Shows the minimum received signal strength indicator due to the neighboring access
points.

Max RSSI: Shows the maximum received signal strength indicator due to the neighboring access
points.

Noise Floor: Shows the level of the noise on the channel.

Channel Load: Shows how much the channel is utilized. A lower channel load denotes a channel
with less interference.
You can click Radio 1 Scan to do the full channel scan again and get the latest results.
The buttons for Radio 2 would be shown if Radio 2 is enabled on the device.

Return: Brings you back to the Wireless Overview page.
WBSIac Access Point User Ma n ua l
Figure 2-72: The Channel Scan Report
Network Tab
56