Table of Contents

Advertisement

Chapter 2 - Management
2.4.4

Wifi - Overview

Clicking on the Network > Wifi tab would bring you to the Wireless Overview page. This page shows
the radios present on the device. These may include the on-board radio and the miniPCI/miniPCIe radio
card. The wireless local area networks (WLANs) are displayed under each radio.
In
Figure
2-70, two tabs are shown at the top. They correspond to the its two radios shown.
The buttons are explained as follows.
Spectrum: Shows the Channel Scan Report and allows you to run the Interference Analyzer.
Add: Allows you to add virtual access points (VAPs) to the radio. By default, there is only one VAP on
the radio. Each VAP corresponds to one network.
Enable: Enables the radio.
Disable: Disables the radio.
Edit: Brings you to the configuration page of the network. Clicking this button is equivalent to
clicking the corresponding tab above, e.g., wifi1: Master "M7" for the radio with SSID given as
"M7".
Remove: Removes the radio.
WBSIac Access Point User Ma n ua l
Figure 2-70: Wireless Overview
Network Tab
54

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Wbsiac-2450-unWbsiac-2450-euWbsiac-2450-us

Table of Contents