Side-By-Side Rack Mounting Details - ABB REL670 Installation And Commissioning Manual

3.5.1
3.5.2
26
Mounting methods and details

Side-by-side rack mounting details

xx04000456.vsd
PosNo Description
1 Two mounting plates
2 Eight screws
3 Eight fastening screws
4 Two mounting angles
Figure 13: Side-by-side rack mounting details.
Mounting procedure for side-by-side rack mounting
Procedure
1. Place the two IEDs next to each other on a flat surface.
2. Fasten a side-by-side mounting plate (PosNo 1).
Use four of the delivered screws.
3. Carefully turn the two IEDs up-side down.
4. Fasten the second side-by-side mounting plate.
Use the remaining four screws.
5. Carefully fasten the mounting angles to the sides of the
IED (PosNo 4).
Use the screws available in the mounting kit.
6. Place the IED assembly in the rack.
7. Fasten the mounting angles with appropriate screws.
2
1
3
4
Chapter 5
Installing the IED