Mounting Procedure For Side-By-Side Flush Mounting; Mounting The Injection Unit Rex060 (Reg670 Only) - ABB Relion 670 Series Installation Manual

1MRK 514 026-UUS F
5.3.5.2

Mounting procedure for side-by-side flush mounting

1
IEC06000181 V2 EN-US
Figure 9:
PosNo
1
2, 3
4
5.3.6

Mounting the injection unit REX060 (REG670 only)

The injection unit REX060 case size is 6U, 1/2 x 19". REX060 can be rack, wall or flush mounted in
the same way as the IED. For guidance, see instructions for rack mounting, wall mounting or flush
mounting the IED in this manual.
REX060 shall be mounted close to the IED. It is recommended that they are mounted in the same
cubicle.
670 series
Installation manual
2
IEC06000181-2-en.vsd
Side-by-side flush mounting details (RHGS6 side-by-side with 1/2 x 19" IED).
The required torque for the screws is 3.5 Nm.
Description
Mounting plate
Screw, washer
Mounting angle
3
4
Quantity
2
16
2
Section 5
Mounting
M12730-6 v4
Type
-
M4x6
-
GUID-264732AC-6C84-44E6-9F86-2065AD0B7D5B v3
27