Safety Information; Compliance Information - Hisense HME8C32 User Manual


According to the test result, this equipment complies with the following standards:
GB4943.1-2011 Information technology equipment - Safety, GB9254-2008 Information
technology equipment - Radio disturbance characteristics - Limits and methods of measurement,
GB17625.1-2012 Electromagnetic compatibility (EMC) - Part 3-2: Limits - Limits for harmonic
current emissions (equipment input current ≤ 16 A per phase), EMC: IEC/EN 60601-1-2: 2014,
and EN 55011/CISPR11 (MDSC-2226-MNA: Class A; MDSC-2226 LED and MDSC-2226 DDI:
Class B).

When the LCD monitor is used with a medical imaging system, ensure that the equipment
connected to the LCD monitor's signal I/O complies with medical equipment standards. All
external connections with other peripheral equipments must comply with the requirements of
Article 16 in IEC 60601-1 of edition 3.1, or the medical electrical system requirements of Table
BBB.201 in IEC 60601-1-1.

The electromagnetic waves emitted by power supply equipment may affect the use of the LCD
monitor and damage it. Install the LCD monitor in an environment free of electromagnetic wave
interference.

If the LCD monitor generates interference or reacts to interference, take one or more of the
following measures:

Adjust the position or direction of the affected equipment.

Increase the distance between the LCD monitor and the affected equipment.

Consult Hisense.

Please use the power line provided by our company and ground it correctly.

Do not modify or retrofit the LCD monitor by yourself. Failure to comply with cause interference
and damage to the LCD monitor.

Equipment classification

Anti-lightning class: Class I

operating mode: continuous

Protection level: IP65 for the front surface, and IP22 for other surfaces

Medical equipment class: (MDD 93/42/EEC or MDR 2017/745): Class I

EMC level (IEC 60601-1-2): Group I Class B
Intended Use
HME8C32 is a monitor for displaying images from cameras or other systems in medical environments.
FCC class B
This device conforms to requirements of Federal Communications Commission (FCC). Equipment
operations are restricted by the following two conditions:

Safety Information

Compliance Information

32