Table of Contents
Advertisement
Base Installation
To install a base for the monitor, please use the base delivered with the Hisense monitor instead of
bases of other brands.
Install the Base
Lay a cloth (or a soft material) on a flat table that can bear enough weight and area to prevent
damage to the LCD monitor. Lay the monitor on the table, as shown in the following figures.
Fix the base with screws delivered with the monitor in the accessories bag to avoid damaging
the monitor.
The appearance of the actual product shall prevail.
Insert the base bracket into the mounting hole at the bottom of the system, and fix the base
bracket and the monitor with four M4X12 screws.
Adjust the monitor (after the base bracket is installed)
When adjusting the monitor, do not contact the display area; otherwise, the monitor may be
damaged.
Installation
10
Base bracket
Advertisement
Table of Contents
