Specifications Affected By Analysis Bandwidth - Keysight M9290A Manual

Specifications Affected by Analysis Band wid th
The specifications in this chapter apply when the 25 MHz path is in use. In IQ Analyzer, this will occur
when the IF Path is set to 25 MHz, whether by Auto selection (depending on Span) or manually.
Specification Name
IF Frequency Response
IF Phase Linearity
Spurious and Residual Responses
Displayed Average Noise Level,
Third-Order Intermodulation and Phase
Noise
64
Information
See specifications in this chapter.
See specifications in this chapter.
The "Spurious Response" on page 30
bandwidth-option-dependent spurious responses are contained
within this chapter.
The performance of the analyzer will degrade by an unspecified
extent when using this bandwidth option. This extent is not
substantial enough to justify statistical process control.
still apply. Further,