Simplified Remote Controller - Daikin SkyAir RZR-TA Series Service Manual

SiUS281811EA
2.2

Simplified Remote Controller

ON/OFF BUTTON
1
Press the button and the system will start. Press the
button again and the system will stop.
OPERATION LAMP (RED)
2
The lamp lights up during operation. Blinks in case of
stop due to malfunction.
DISPLAY "
CONTROL)
It is impossible to changeover heating/cooling with the
3
remote controller when it shows this display. (As for
details, see "SETTING OF MASTER REMOTE
CONTROLLER" in the installation manual attached to
the indoor unit.)
DISPLAY "
This display shows that the total heat exchanger and
4
the air cleaning unit are in operation. (These are
optional accessories).
DISPLAY "
5
This display shows the set temperature. Only given
during a cooling or heating operation.
DISPLAY "
(OPERATION MODE)
This display shows current OPERATION MODE.
6
" " is not available with outdoor units specially
designed for cooling only.
" " is reserved only for outdoor units capable of heat
recovery.
Part 3 Remote Controller
6
3
13
5
10
BRC2A71
" (CHANGEOVER UNDER
" (VENTILATION/AIR CLEANING)
" (SET TEMPERATURE)
" " " " " " " " "
1
4
H L
9
F
12
DISPLAY " " (UNDER CENTRALIZED
CONTROL)
7
When this display shows, the system is UNDER
CENTRALIZED CONTROL.
(This is not a standard specification)
DISPLAY " " (FAN SPEED)
H L
8
This display shows the fan speed: HIGH or LOW.
DISPLAY " " (DEFROST / HOT START)
Indicates that defrost or hot start (during which the fan
9
is stopped until the temperature of air supply rises
enough at the start of a heating operation) is in
progress.
TEMPERATURE SETTING BUTTON
Use this button for SETTING TEMPERATURE of the
thermostat.
10
; Each press raises the set temperature by 1°F.
; Each press lowers the set temperature by 1°F.
The v ariable temperature range is between 60°F and
90°F.
FAN SPEED CONTROL BUTTON
11
Press this button to select the fan speed, HIGH or LOW,
of your choice.
OPERATION MODE SELECTOR BUTTON
12
Press this button to select OPERATION MODE.
DISPLAY " " (MALFUNCTION)
Indicates malfunction and blinks if the unit stops
13
operating due to malfunction.
(As for details, see "TROUBLE SHOOTING" in the
operation manual attached to the outdoor unit.)
Names and Functions
2
7
8
11
87