Troubleshooting by Error Codes
4.13 Swing Flap Motor Abnormality
A7
Error Code
Applicable
FHQ-P, FHQ-M
Models
Method of Error
Utilizes ON/OFF of the limit switch when the motor turns.
Detection
Error Decision
When ON/OFF of the micro-switch for positioning cannot be reversed even though the swing flap
Conditions
motor is energized for a specified amount of time (about 30 seconds).
∗ Error code is displayed but the system operates continuously.
Supposed
Defective swing motor
Causes
Defective connection cable (power supply and limit switch)
Defective micro-switch
Defective indoor unit main PCB
230
SiUS281811EA
Part 6 Service Diagnosis