Daikin SkyAir RZR-TA Series Service Manual page 105

SiUS281811EA
6.1.1 Service Settings Menu
Service settings menu
Test Operation
Maintenance Contact
Field Settings
Energy Saving Options
Prohibit Function
Min Setpoints Differential
Group Address
Indoor unit AirNet Address
Outdoor unit AirNet Address
Error History
Indoor Unit Status
Outdoor Unit Status
Forced Fan ON
Switch Main Sub Controller
Filter Indicator
Test Filter Auto Clean
Brush/Filter Ind.
Disable Filter Auto Clean
Part 3 Remote Controller
Item 2
—
None
Maintenance Contact
Indoor Unit No.
Mode No.
First Code No.
Second Code No.
Setpoint Range Limitation
Setback Configuration
Auto-setback by Sensor
Auto-off by Sensor
Prohibit Buttons
Prohibit Mode
None, Single SP, 0 to 8°F
Group Address (Group)
Group Address (Unit)
Unit No., Address Set
Unit No., Address Set
RC Error History
Indoor unit Error History
Unit No.
Th1
Th2
Th3
Th4
Th5
Th6
Unit No.
Th1
Th2
Th3
Th4
Th5
Th6
Unit No.
—
—
—
—
No, Yes
Service Settings Menu, Maintenance Menu
Item 3
—
—
—, 0 to 9 (in order)
—
—
—
—
Temperature
Recovery Differential
Enable/Disable, Settings
Enable/Disable, Auto-off in (hours)
Up/Down, Left, Right, On/Off, Mode, Fan Speed
Fan, Cool, Heat, Auto, Dry, Vent Clean
—
Gr Addr. Set
Unit No., Gr Addr. Set
—
—
Unit No., Error, Date, Time
(Up to 10 errors received by the remote controller can be
displayed.)
Unit No., Error, Date, Time
(Up to 5 errors from the indoor unit error record can be
displayed.)
—
Suction air thermistor
Heat exchanger liquid pipe thermistor
Heat exchanger gas pipe thermistor
Discharge air thermistor
Remote controller thermistor (FBQ, FTQ)
Floor temperature thermistor (FCQ)
Control temperature thermistor (FBQ, FCQ, FTQ)
—
—
—
—
—
—
—
—
—
—
—
—
—
99