Table of Contents
Advertisement
G600C/G600EC
Pièce No. 776-929
Clean Front Installation
CLEAN FRONT TRIM INSTALL
INSTRUCTIONS:
1. Install the nailing flanges, see manual
for instructions.
2. Loosen the four (4) screws that secure
the left and right nailing flanges to the
unit.
3. Slide the left and right tiling flanges onto
the front of the fireplace. Use the slots
to center, with the screw securing the
nailing flanges (Diagram 1).
4. Tighten screws.
5. Slide the bottom tiling flange against
the bottom of the fireplace. Secure with
a screw on each side.
6. Finishing material can now be pressed
against the flat edge created by the
clean front trim (Diagram 2).
26-3/4"
(679 mm)
2"
(51 mm) max.
max.
Diagram 2: Finishing Dimensions
920-302-fr
28-3/4"
(730 mm)
CLEAN FRONT TRIM INSTALLATION
Diagram 1: Exploded View
NOTE: Do NOT finish beyond the
dimensions in Diagram 2.
1
installation
G600C Gas Fireplace | 33
Grandview
®
08.14.20
Advertisement
Table of Contents
