Regency Grandview G600C Owners & Installation Manual page 75

DRIFTWOOD MEDIA TRAY INSTALLATION
8. Place Log #4 on the righthand side of the tray as shown. Ensure
the right pin on log #1 fits into the hole on the underside of Log
#4. Make sure Log #4 is supported by the tray (see encircled).
9. Place Log #5 in the front-left area of the tray as shown.
5
Important: Ensure no logs cover the gas burner porting area.
10. To remove the driftwood media tray, reverse the steps 1-9.
920-379
1
4
Page 2
installation
G600C/G600EC
G600C Gas Fireplace | 75
Grandview
®
07.29.21