Regency Grandview G600C Owners & Installation Manual page 70

installation
G600EC/G600C
10. Install Log 6 on the left side of Log 1. Line up the pin on Log 1
with the pin hole on Log 6—the opposite end of Log 6 will rest
in the notch in Log 4.
4
Diagram 11-Install Log 6
11. Install Log 7 on the right side of Log 1 as shown. The pin hole
on the underside of Log 7 should land on the pin of Log 1. The
bottom of Log 7 will rest on the log grate.
7
Diagram 12-Install Log 7
12. Install Log 8 at the front of the log grate. The cutouts in Log 8
should rest in the 4 + 5
th
Diagram 13-Install Log 8
920-294
70 | Grandview
G600C Gas Fireplace
®
6
1
1
prongs from the right of the log grate.
th
8
13. Install Log 9 to the right of Log 5. The cutout in Log 9 will rest in
the 2 prong from the right on the log grate.
nd
Diagram 14-Install Log 9
14. Install Log 10 as shown. The flat bottom will rest on the firebox
floor and the opposite end will rest on the 3
Diagram 15-Install Log 10
15. Install Log 11 to the left of the log grate on the firebox floor as shown.
Diagram 16-Install Log 11
Page 3 of 4
LOG SET INSTALLATION
5
9
prong from the left.
rd
10
11
09.04.20