Table of Contents
Advertisement
installation
10. Install the exhaust collar onto the rear. Hang the collar onto the 2 previously
loosened bottom screws, secure in place with the 4 top screws, and then
tighten the 2 bottom screws.
11. Install the intake collar onto the rear. Hang the collar onto the previously
loosened bottom screws, secure in place with the 2 top screws, and then
tighten the 2 bottom screws.
44 | Grandview
G600C Gas Fireplace
®
Diagram 16
Diagram 17
Diagram 18
12. Reinstall the collar trim piece with 6 screws.
Diagram 19
Hidden screw
Advertisement
Table of Contents
