Regency Grandview G600C Owners & Installation Manual page 69

LOG SET INSTALLATION
4. Install 2 log support plates onto the burner with 2 screws each
as shown.
Log Support Plates
Diagram 5-Install Log support plate installation
5. Place Log 1 onto the grate, behind the rear of the burner. Ensure
the left cut out butts against the end of the burner tube and the right
end of the log butts against the curve of the burner. Final position
of the log should be pulled forward and to the right.
Diagram 6-Log 1 installation
6. Install Log 2 on left log support plate. Line up the pins on the plate
with the pin hole on the log.
2
Diagram 7-Install Log 2
920-294
1
1
Page 2 of 4
7. Install Log 3 on right log support plate. Line up the pins on the
plate with the pin hole on the log.
2
3
Diagram 8-Install Log 3
8. Install Log 4 diagonally across Log 2. Rest Log 4 in the notch out
on Log 2 as shown.
4
2
Diagram 9-Install Log 4
9. Install Log 5; one end will rest in the notch out on Log 3—the 'Y'
end will rest on the 3 prong from the right on the log grate.
rd
Diagram 10-Install Log 5
Grandview
installation
G600EC/G600C
1
3
5
G600C Gas Fireplace | 69
®
09.04.20