Network Setup Options; Port - Canon imagePRESS Server В5000 Configuration And Setup

Network setup options

To access Network setup options from the printer control panel, press the Main Menu button, press Show All, then
press Fiery > Tools > Setup > Network.
For more information, see

Port

The following setup options are available in the Port group.
Ethernet
Ethernet Speed
Choose the appropriate speed of the network.
Choose Auto in any of these cases:
•
The network speed is unknown.
•
The network environment is mixed.
•
The network uses 1 Gbps.
Settings:
802.1x
The imagePRESS Server can seek authentication from an 802.1x authentication server (such as a RADIUS server),
often through an intermediate access point (an authenticator).
The imagePRESS Server seeks this authentication at startup, or when the Ethernet cable is disconnected and
reconnected. If the imagePRESS Server is successfully authenticated, it is allowed access to the network.
Enable 802.1x Authentication
Select to allow the imagePRESS Server to seek authentication from an 802.1x authentication server.
Settings:
Access Setup from the printer control panel
10 Mbps Half-Duplex
100 Mbps Half-Duplex
Auto (default)
10 Mbps Full-Duplex
100 Mbps Full-Duplex
On
Configuration and Setup
Setting up from the printer control panel
on page 35.
43