Canon imagePRESS Server В5000 Configuration And Setup page 44

Select EAP Type
Choose the type of EAP (Extensible Authentication Protocol).
Note: This option is only available when Enable 802.1x Authentication is selected.
Settings:
Username
The imagePRESS Server uses this information to request authentication from an 802.1x authentication server.
Note: This option is only available when Enable 802.1x Authentication is selected.
Use ASCII code characters (63 characters maximum). It is possible to enter more, but the supported length is 63
characters maximum. Although you can enter characters other than ASCII code characters, only ASCII code
characters are guaranteed for authentication.
Settings:
Password
The imagePRESS Server uses this information to request authentication from an 802.1x authentication server.
Note: This option is only available when
Use ASCII code characters (63 characters maximum). It is possible to enter more, but the supported length is 63
characters maximum. Although you can enter characters other than ASCII code characters, only ASCII code
characters are guaranteed for authentication.
Settings:
Validate Server Certificate
Select this option if you set Select EAP Type to PEAP-MSCHAPv2 and want the imagePRESS Server to use a
trusted root certificate when communicating with the authentication server. If you want the imagePRESS Server
to validate the server certificate, place the certificate in the list of trusted certificates of the imagePRESS Server.
Note: This option is only available when
Settings:
Off (default)
MD5-Challenge
PEAP-MSCHAPv2 (default)
User name (default is product or site-specific)
Enable 802.1x Authentication
Password (default is product or site-specific)
Enable 802.1x Authentication
On
Off (default)
Configuration and Setup
Setting up from the printer control panel
on page 43 is selected.
on page 43 is selected.
44