Start Fiery Setup Wizard From Command Workstation - Canon imagePRESS Server В5000 Configuration And Setup

Start Fiery Setup Wizard from WebTools
You must be logged in as Administrator to use Fiery Setup Wizard.
If you need to know which settings are applied by print environments, we recommend that you perform initial setup
through Configure instead. Fiery Setup Wizard does not include information about which settings are applied. To
see the settings, print the imagePRESS Server Configuration page after you complete setup.
Depending on which print environment you choose, Fiery Setup Wizard may limit users or print functions. If an
unintended problem occurs after using Fiery Setup Wizard, print the Configuration page and check which settings
are applied.
1 Open an Internet browser and type the IP address or DNS name of the imagePRESS Server.
2 In WebTools, on the Home tab, next to the Fiery controller initial setup is not complete message, click the Click
here to continue link.
Fiery Setup Wizard opens.

Start Fiery Setup Wizard from Command WorkStation

You must be logged in as Administrator to use Fiery Setup Wizard.
If you need to know which settings are applied by print environments, we recommend that you perform initial setup
through Configure instead. Fiery Setup Wizard does not include information about which settings are applied. To
see the settings, print a Configuration page after you complete setup.
Depending on which print environment you choose, Fiery Setup Wizard may limit users or print functions. If an
unintended problem occurs after using Fiery Setup Wizard, print the Fiery configuration page and check which
settings are applied.
1 In Command WorkStation, as Administrator, do one of the following:
•
In the Server menu, click Configure.
•
In Device Center, on the General or Users tabs, click Configure.
2 In the Fiery Setup dialog box, click Fiery Setup Wizard.
Configuration and Setup
Setting up from a client computer
84