Toner Saving
Specify whether to minimize the effects of "blasting," which occurs when excess amounts of toner on certain media
types "blast" beyond the density boundaries defined in the print job.
Settings:
Vertical Text Width Adjustment
Adjusts text objects by making them thicker in a vertical direction. Select Level 1 to thicken the width of text objects.
Select Level 2 to further thicken the width of text objects (compared to Level 1).
Note: The horizontal or vertical direction is determined by the direction of paper output. The main scanning
direction is horizontal. For long edge feed, the long side is recognized as horizontal, and the short side is recognized
as vertical. For short edge feed, the long side is recognized as vertical and the short side is recognized as horizontal.
Settings:
Dept. ID Management
Enable Dept. ID
This feature allows you to print imagePRESS Server information pages, including:
•
PS Test Page and Font List
•
PCL Test Page and PCL Font List
•
Configuration page
•
Job Log
•
E-mail Log (if email is enabled)
•
FTP log (if FTP printing is enabled)
Note: You must enable E-mail Service to print the E-mail Log. See
Note: You must enable FTP printing to print the FTP Log.
On
Off (default)
On
Off
Level 1 (default)
Level 2
Setting up from the printer control panel
Managing Email address books
Configuration and Setup
on page 111.
73