Send Licensing Updates To The Fiery Administrator Email Address; Hyperrip Mode - Canon imagePRESS Server В5000 Configuration And Setup

Send Licensing Updates to the Fiery Administrator Email Address

Enables the imagePRESS Server to send licensing updates to the administrator email address. E-mail Service must be
enabled, and an administrator email address must be configured.
Note: This option is only available through Configure. It is not available through the printer control panel or the
Canon Unity Display.
Note: This option is only available when Enable Native Document Conversion using PrintMe is selected.
Settings:

HyperRIP Mode

HyperRIP maximizes performance for print jobs by processing print jobs simultaneously. This feature is most useful
when print jobs are typically longer than one or two pages.
•
If jobs are typically less than 10-20 pages, select Multiple jobs to process multiple print jobs simultaneously.
•
If jobs are typically longer than 10-20 pages, select Single job to split individual jobs into sections that are
processed simultaneously.
Note: The most efficient selection depends upon the number and type of jobs being processed and printed. For
greatest efficiency, we recommend comparing the output rate for each selection during a typical mix of processing
and printing jobs.
Note: This setup option is only available on the imagePRESS Server B5000.
To access HyperRIP Mode, choose Configure > RIP > HyperRIP Mode.
Settings:
On
Off (default)
Multiple jobs (best for short jobs)
Single job (best for longer jobs) (default)
Configuration and Setup
Setup Option Reference
94