Table of Contents
Advertisement
Jobs sent over Bonjour are sent to the default print connection for the selected protocol. For example, if you
choose LPD, jobs are sent to the connection that you chose for LPD jobs
default connection can be defined (such as for IPP), the Print queue is used.
Settings:
Enable Direct Mobile Printing
Direct Mobile Printing allows direct wireless printing to the imagePRESS Server from supported mobile devices.
The mobile devices must be connected to the same wireless-network subnet as the imagePRESS Server to print
using Direct Mobile Printing.
Bonjour must be enabled to use Direct Mobile Printing.
For more information about Direct Mobile Printing, see
Settings:
Printer setup options
To access Printer setup options from the printer control panel, press the Main Menu button, press Show All, then
press Fiery > Tools > Setup > Printer.
For more information, see
General
Use these settings to specify the basic characteristics of the printer.
Note: The Hold queue, Print queue, or both must be published to enable users to print to the imagePRESS Server
over a TCP/IP network, and to provide access to Fiery Extended Applications (FEA) and WebTools.
Personality
Sets the personality of the printer. The settings have the following impact:
•
If set to Auto, the PDL type of incoming jobs is automatically detected and sent to the appropriate interpreter.
•
If set to PCL, incoming jobs are sent to the PCL interpreter. If set to PS, incoming jobs are sent to the PS
interpreter.
Settings:
LPD (default)
Port 9100
IPP
On
Off (default)
Access Setup from the printer control panel
Auto (default)
PCL
Setting up from the printer control panel
(Default LPD Queue
Mobile device printing
on page 35.
Configuration and Setup
on page 55). If no
on page 114.
67
Advertisement
Table of Contents
