The following diagnostics options are available with the integrated Web server:
● Start page with general CPU information
● Information on diagnostics
● Contents of the diagnostics buffer
● Module information
● Alarms
● Information about communication
● PROFINET topology
● Motion Control diagnostics
● Trace
Configuring the Web server in STEP 7
Proceed as follows to activate the Web server:
Requirements
● You have opened STEP 7.
● You have added a CPU to the project.
● You have opened the project view.
Procedure
1. Open the network view.
2. Select the CPU.
3. Open the "Properties" tab in the Inspector window.
4. Select the entry "Web server" in the "General" area navigation.
Figure 4-19
Diagnostics
Function Manual, 11/2019, A5E03735838-AF
Activate the Web server
Setting and determining system diagnostics
4.2 Options for displaying system diagnostics
49