Siemens SIMATIC ET 200AL System Manual page 1013

Result
The diagnostics events are displayed in the diagnostics buffer in the sequence in which they
occur.
Figure 3-2
Note
Automatic updating of diagnostics information
You set automatic updating of the diagnostics information under: "Display" >
"DiagnosticRefresh".
Additional information
You can find information about the configuration of alarms in the section Configuring alarms
for system diagnostics (Page 23).
Diagnostics
Function Manual, 11/2019, A5E03735838-AF
Display of the diagnostics buffer in the display of the SIMATIC S7-1500 CPU
Quick start
3.1 Using the display of the CPU
17