Attachment Frame Attachment Kit; High-Pressure Cleaner Attachment (Ex-Factory); Symbols On The Display During Sweeping; Intended Use - Kärcher MC 250 Manual

2.7

Attachment frame attachment kit

Possible attachments on the attachment frame: Spreader,
water drum or the grass / leaf vacuum container on a mow-
er / vacuum combination.
Attachment frame
1
Insert for supports (2x left and 2x right)
2
Locking button (4x)
3
Counternut
4
Retaining clip (2x)
5
Locking rod (2x)
6
Ball socket (4x)
7
1. All 4 locking buttons must first be attached, adjusted and
secured with the counternuts.
a The locking buttons 6.321-295.0 are part of the "At-
tachment frame" attachment kit
b Screw the locking button into the thread of the welded
nut on the frame and adjust it.
c If the setting is correct, the bolt of the pulled locking
button releases the slot for the supports.
d Secure with counternut.
2. Attach the attachment frame to the vehicle.
a Remove the retaining clip and pull the locking rods out
of the attachment frame.
b Lower the attachment frame onto the vehicle using a
crane (if available) until the attachment frame sits se-
curely in place in the 4 ball sockets. Use the assis-
tance of a second person if necessary.
c Push in the locking rods.
d Secure with the retaining clip.
3. The corresponding attachment can be positioned and
fastened on the attachment frame once this is securely
attached to the vehicle and secured, see the operating
instructions for the attachment.
4. The attachment frame with the attachment can only be
removed using the "Supports" attachment kit. A detailed
description is provided in the chapter "Removing the
waste container".
2.8 High-pressure cleaner attachment (ex-
factory)
The high-pressure cleaner attachment kit is included in the
scope of delivery and already installed in the vehicle when
ordered ex-factory.
This chapter describes operation and care.
46
High-pressure cleaner
1
High-pressure hose reel
2
Nozzle holder
3
Fastening trigger gun
4
Waste container flap
5
Oil level sight glass
1
Oil drain plug
2
Water filter
3
Water connection
4

2.8.1 Symbols on the display during sweeping

The following symbols and warning indicators are shown
on the display when operating with the high-pressure
cleaner.
High-pressure cleaner is activated
High-pressure cleaner inactive

2.8.2 Intended use

Use the high-pressure cleaner only for the following activ-
ities:
● Cleaning with the high-pressure jet without detergent
(e.g. façades, park seats, garden paths).
● Only operate the high-pressure cleaner with the flat jet
nozzle provided.
● This high-pressure cleaner is intended and tested for
the exclusive use with the sweeper vacuum MC 250.
When the water quantity is reduced via the pressure/quan-
tity control on the trigger gun, the overflow valve opens and
part of the water flows back to the suction side of the pump.
English
Pressure relief valve