Error Indicators - Epson WorkForce ES-500W II User Manual

Scanner Basics
>
Buttons and Lights on the Control Panel
D
Automatic Feeding Mode
light
E
Ready light
F
Skip double feed detection
light
G
Slow mode light
Related Information
"Error Indicators" on page 22
&
"Scanning Different Sizes or Types of Originals One by One Continuously (Automatic Feeding Mode)" on
&
page 73
You can scan different sizes or types of originals one by one using Automatic Feeding Mode. In this mode, the
scanner starts scanning automatically when originals are loaded into the scanner.

Error Indicators

Scanner errors
Indicators
Flashing slowly
On
Flashing fast
Flashing fast
Flashing fast
Flashing fast
>
Error Indicators
The scanner is in Automatic Feeding Mode. Scanning starts when
an original is placed in the input tray.
On:
Flashing:
Off:
This is on when skipping double feed detection is enabled.
This is on during slow mode.
Situation
A paper jam or double feed occurred.
The scanner cover is opened.
A fatal error has occurred.
22
The scanner is ready to be used.
The scanner is scanning, waiting to scan,
processing, or sleeping.
The scanner cannot be used because the power
is off or an error has occurred.
Solutions
Open the scanner cover, and then re-
move jammed originals. Close the cov-
er to release the error. Load the origi-
nals again.
Close the scanner cover.
Turn the power off and on again. If the
error continues to occur, contact your
local dealer.