Using A Digital Certificate - Epson WorkForce ES-500W II User Manual

Administrator Information
Items
Enable SNMPv1/v2c
Access Authority
Community Name (Read Only)
Community Name (Read/Write)
SNMPv3 Settings
Items
Enable SNMPv3
User Name
Authentication Settings
Algorithm
Password
Confirm Password
Encryption Settings
Algorithm
Password
Confirm Password
Context Name

Using a Digital Certificate

About Digital Certification
❏ CA-signed Certificate
This is a certificate signed by the CA (Certificate Authority.) You can obtain it to apply to the Certificate
Authority. This certificate certifies the existence of the scanner is and used for SSL/TLS communication so that
you can ensure the safety of data communication.
When it is used for SSL/TLS communication, it is used as a server certificate.
When it is set to IPsec/IP Filtering or IEEE802.1x communication, it is used as a client certificate.
>
Advanced Security Settings
Setting value and Description
Select to enable SNMPv1/v2c.
Set the access authority when SNMPv1/v2c is enabled. Se-
lect Read Only or Read/Write.
Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
Enter 0 to 32 ASCII (0x20 to 0x7E) characters.
Setting value and Description
SNMPv3 is enabled when the box is checked.
Enter between 1 and 32 characters using 1 byte characters.
Select an algorithm for an authentication for SNMPv3.
Enter the password for an authentication for SNMPv3.
Enter between 8 and 32 characters in ASCII (0x20-0x7E). If
you do not specify this, leave it blank.
Enter the password you configured for confirmation.
Select an algorithm for an encryption for SNMPv3.
Enter the password for an encryption for SNMPv3.
Enter between 8 and 32 characters in ASCII (0x20-0x7E). If
you do not specify this, leave it blank.
Enter the password you configured for confirmation.
Enter within 32 characters or less in Unicode (UTF-8). If you
do not specify this, leave it blank. The number of characters
that can be entered varies depending on the language.
137
>
Using a Digital Certificate