Error Indicators; Page Separation Lever - Epson DS-410 User Manual

User's Guide

Error Indicators

Scanner errors
Indicators
Flashing
On
Flashing
Flashing
Flashing simultaneously
Off
On
On
Related Information
"Removing Jammed Originals from the Scanner" on page 99
&

Page Separation Lever

Change the position of the page separation lever depending on the type of document you are going to scan.
Scanner Basics
Situation
A paper jam or double feed occurred.
The scanner cover is opened.
A fatal error has occurred.
The scanner has started in recovery
mode because the firmware update
failed.
13
Solutions
Open the scanner cover, and then re-
move jammed originals. Close the cov-
er to release the error. Load the origi-
nals again.
Close the scanner cover.
Turn the power off and on again. If the
error continues to occur, contact your
local dealer.
Follow the steps below to try to up-
date the firmware again.
1. Connect the computer and the scan-
ner with a USB cable. (During recovery
mode, you cannot update the firm-
ware over a network connection.)
2. Visit your local Epson website for fur-
ther instructions.