Making Wi-Fi Settings From The Control Panel; Checking The Network Connection Status; Checking The Network Status Using Network Light; Checking The Network Of The Computer (Windows Only) - Epson WorkForce ES-500W II User Manual

Adding or Replacing the Computer or Devices
Follow the on-screen instructions to finish setup.

Making Wi-Fi Settings from the Control Panel

You can make network settings from the scanner's control panel in several ways. Choose the connection method
that matches the environment and conditions that you are using.
If the wireless router supports WPS, you can make settings by using push button setup.
After connecting the scanner to the network, connect to the scanner from the device that you want to use
(computer, smart device, tablet, and so on.)
Related Information
"Making Wi-Fi Settings from the Control Panel" on page 65
&

Checking the Network Connection Status

You can check the network connection status in the following way.

Checking the Network Status Using Network Light

You can check the network connection status using the network light on the scanner's control panel.
Related Information
"Lights" on page 21
&
"Error Indicators" on page 22
&

Checking the Network of the Computer (Windows only)

By using the command prompt, check the connection status of the computer and the connection path to the
scanner. This will lead you to solve the problems.
>

Checking the Network Connection Status

121
> ...
Chec