Types Of Originals That Require Attention - Epson WorkForce ES-500W II User Manual

Specifications of Originals and Placing Originals
Type
Originals that cannot be
loaded directly into the
scanner
*1 Fold in half to set.
*2 Originals that are wider than 215.9 mm (8.5 in.) need to be folded in half.
*3 The leading edge of the original must be placed at the binding part of the Carrier Sheet when scanning an original
approximately 297 mm (11.7 in.) long. Otherwise, the length of the scanned image may be longer than intended as the
scanner scans to the end of the Carrier Sheet when you select Auto Detect as the Document Size setting in the
application.
Related Information
"Carrier Sheet Codes" on page 27
&
Specifications of Envelopes
The specification of envelopes you can load into the scanner.
Size
C6
DL

Types of Originals that Require Attention

The following types of originals may not be successfully scanned.
❏ Originals with an uneven surface such as letter head paper
Size
*1
A3
A4
*1
B4
Letter
*1
Legal
B5
A5
B6
A6
A8
Custom size:
❏ Width: up to 431.8 mm (17 in.)
*2
❏ Length: up to 297 mm (11.7 in.)
*3
Measurement
114×162 mm (4.49×6.38 in.)
(standard size)
110×220 mm (4.33×8.66 in.)
(standard size)
>
Specifications of Originals
Thickness
0.3 mm (0.012 in.) or less
(excluding the thickness of
the Carrier Sheet)
Thickness
0.38 mm (0.015 in.) or less
33
> ...
Types of Original
Loading Capacity of
the Carrier Sheet
5 sheets
Loading Capacity
5 envelopes