Installing Your Applications - Epson WorkForce ES-500W II User Manual

Solving Problems
3. To uninstall the scanner driver, select System Preferences from the Apple menu > Printers & Scanners (or
Print & Scan, Print & Fax), and then remove the scanner from the enabled scanner list.
4. Quit all running applications.
5. Select Go > Applications > Epson Software > Uninstaller.
6. Select the application you want to uninstall, and then click Uninstall.
Important:
c
The Uninstaller removes all drivers for Epson scanners on the computer. If you use multiple Epson scanners and
you only want to delete some of the drivers, delete all of them first, and then install the necessary scanner
drivers again.
Note:
If you cannot find the application you want to uninstall in the application list, you cannot uninstall using the
Uninstaller. In this situation, select Go > Applications > Epson Software, select the application you want to uninstall,
and then drag it to the trash icon.

Installing Your Applications

Follow the steps below to install the necessary applications.
Note:
❏ Log on to your computer as an administrator. Enter the administrator password if the computer prompts you.
❏ When reinstalling applications, you need to uninstall them first.
1. Quit all running applications.
2. When installing scanner driver (Epson Scan 2), disconnect the scanner and the computer temporarily.
Note:
Do not connect the scanner and the computer until you are instructed to do so.
3. Install the application by following the instructions on the Website below.
http://epson.sn
Note:
For Windows, you can also use the software disc that came with the scanner.
>
Uninstalling and Installing Applications
>
Installing Your Applications
116