Epson WorkForce ES-500W II User Manual page 52

Specifications of Originals and Placing Originals
Placing Irregular Shaped Originals
1. Open the input tray and extend the input tray extension. Slide out the output tray, extend the output tray
extension, and then raise the stopper.
2. Slide the edge guides on the input tray all the way out.
3. Place the Carrier Sheet with the illustration on the front edge facing up and place the original in the center of
the Carrier Sheet with the side to be scanned facing down.
>
Placing Originals
52
>
Irregular Shaped Originals