Table of Contents
Advertisement
User's Guide
D
Automatic Feeding Mode
light
E
Ready light
F
Skip double feed detection
light
G
Slow mode light
Related Information
"Error Indicators" on page 14
&
"Placing a Mixture of Originals at Different Sizes" on page 82
&
Error Indicators
Scanner errors
Indicators
Flashing slowly
On
Flashing fast
Flashing fast
Flashing fast
Flashing fast
On
On
On
On
Off
On
On
Scanner Basics
The scanner is in Automatic Feeding Mode. Scanning starts when
an original is placed in the input tray.
On:
Flashing:
Off:
This is on when skipping double feed detection is enabled.
This is on during slow mode.
Situation
A paper jam or double feed occurred.
The scanner cover is opened.
A fatal error has occurred.
The scanner has started in recovery
mode because the firmware update
failed.
14
The scanner is ready to be used.
The scanner is scanning, waiting to scan,
processing, or sleeping.
The scanner cannot be used because the power
is off or an error has occurred.
Solutions
Open the scanner cover, and then re-
move jammed originals. Close the cov-
er to release the error. Load the origi-
nals again.
Close the scanner cover.
Turn the power off and on again. If the
error continues to occur, contact your
local dealer.
Follow the steps below to try to up-
date the firmware again.
1. Connect the computer and the scan-
ner with a USB cable. (During recovery
mode, you cannot update the firm-
ware over a network connection.)
2. Visit your local Epson website for fur-
ther instructions.
Advertisement
Table of Contents
