Encrypted Communication Using Ipsec/Ip Filtering - Epson WorkForce ES-500W II User Manual

Administrator Information
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The scanner is updated.
Related Information
"Running Web Config on a Web Browser" on page 25
&

Encrypted Communication Using IPsec/IP Filtering

About IPsec/IP Filtering
You can filter traffic based on IP addresses, services, and port by using IPsec/IP Filtering function. By combining of
the filtering, you can configure the scanner to accept or block specified clients and specified data. Additionally, you
can improve security level by using an IPsec.
Note:
Computers that run Windows Vista or later or Windows Server 2008 or later support IPsec.
Configuring Default Policy
To filter traffic, configure the default policy. The default policy applies to every user or group connecting to the
scanner. For more fine-grained control over users and groups of users, configure group policies.
1. Access Web Config and then select the Network Security tab > IPsec/IP Filtering > Basic.
2. Enter a value for each item.
3. Click Next.
A confirmation message is displayed.
4. Click OK.
The scanner is updated.
Related Information
"Running Web Config on a Web Browser" on page 25
&
Default Policy Setting Items
Default Policy
Items
IPsec/IP Filtering
>
Advanced Security Settings
Settings and Explanation
You can enable or disable an IPsec/IP Filtering feature.
144
>
Encrypted Communication Using IPsec/IP Filtering