MoniMax 5600T
5. Operator Function
5.1 Entering OP Mode
You may press supervisor button in order to enter OP mode.
※ Precaution : When you are going to shut down after completing the specification changes,
make sure that you should firstly exit to AP mode like transaction screen from OP mode and
then turn off the power. It means that you should not shut down in OP mode. Otherwise, it may
not save the specification change completely
5.2 User Select Screen
Press number of user (Supervisor, Operator, Technician)
1. SUPERVISOR : Input the password to go to SUPERVISOR mode. The default password is 's0987'.
2. OPERATOR : Input the password to go to OPERATOR mode. The default password is 'o0987'.
3. TECHNICIAN : Input the password to go to TECHNICIAN mode. The default password is 't0987'.
* Please refer to OP ENTRY MAP in the next page for more understanding.
5 - 2
5. Operator Function