HYOSUNG MoniMax 5600T Operator's Manual page 120

MoniMax 5600T
Cash Dispenser
4)
Error
Code
Received a command that the CDU
4000000
does not have from the upper unit
CS2 Dark detection during initializing
4001100 or dispense
(Reject box mounting/dismounting)
CS3 Dark detection during initializing
4001200
or Dispense reserved operation
CS2 and CS3 Dark detection during
4001300 initializing
operation
CS4A Dark detection during
4001400 initializing or dispense reserved
operation
CS2 and CS4A
during
4001500
reserved
mounting/dismounting)
CS3 and CS4A Dark detection during
4001600 initializing
operation
CS2, CS3 and CS4A Dark detection
4001700 during
reserved operation
CS4B
4001800 initializing
operation
CS2, CS4B Dark Detection during In
4001900 Initializing
operation
CS3 and CS4B Dark detection during
4001A00 initializing
operation
Cause
reserved operation
or dispense reserved
Dark detection
initializing or dispense
operation (Reject
or dispense reserved
initializing or dispense
Dark detection during
or dispense reserved
or Dispense reserved
or dispense reserved
1. Check the CDU received command
2. Check the CDU firmware version and refer to
specifications.
1. Initialize after mounting the reject box.
2. Check if the CS2 sensor cable is disconnected
3. Exchange a sensor after abnormal operating CS2
Sensor
1. Remove the remaining notes or foreign objects on the
gate
2. Check if the CS3 sensor bracket is bended.
3. Check if the CS3 sensor cable is disconnected
4. Exchange a sensor after abnormal operating CS3
Gate detecting sensor.
The same as #40011 and #40012 error handling
1. Remove the remaining notes and foreign objects at
the position of the CS4A sensor
2. Check if the CS4A sensor cable is disconnected
3. Exchange a sensor after abnormal operating the
CS4A Sensor
The same as #40011 and #40014 error handling
box
The same as #40011 and #40012 error handling
The same as #40011, #40012 and #40014 error
handling
1. Remove the remaining notes and foreign objects at
the position of the CS4B sensor
2. Check if the CS4B sensor cable is disconnected
3. Exchange a sensor after abnormal operating the
CS4B sensor
The same as #40011 and #40018 error handling
The same as #40011 and #40018 error handling
6 - 25
6. Appendix
Handling