Opening And Closing The Security Door - HYOSUNG MoniMax 5600T Operator's Manual

MoniMax 5600T
4. Operating Instructions

4.1 Opening and Closing the Security Door

4.1.1 Electronic Lock
Opening the Lock
1. Insert a key for security door into the lock case
and turn it clockwise until it is stopped.
2. Enter valid six (6) digit combination. (Factory set to 1-2-3-4-5-6)
3. The lock will indicate a valid combination with a double signal.
4. Within four (4) seconds, turn the handle to the open position
if using a swing bolt style lock.
• If using a dead bolt style lock, turn the keypad to the open position
(clock-wise).
5. Pull door open.
• Invalid Combination - Lock will signal three (3) times.
Changing the Combination
ALWAYS PERFORM THIS OPERATION WITH THE DOOR OPEN
(If your unit is programmed for Dual Mode, each combination must be changed
independently. Follow these instructions for each combination change.)
1. Enter "zero" six times.
2. Enter your existing six (6) digit combination one time.
3. Enter your NEW six (6) digit combination two times.
4. If a mistake is made wait thirty (30) seconds and repeat steps 1 - 3.
5. Test lock operation several times before closing the door.
CAUTION: When selecting a combination do not use birthday or other predictable
data that could give correlation between the user and the combination. Keep the
combination secret.
• Valid Combination - Double signal after valid six (6) digit combination is entered.
• Invalid Combination - Triple signal indicates the old combination is still valid.
4 - 2
4. Operating Instructions
Electronic Lock
Handle
Key Lock