Table of Contents
Advertisement
MoniMax 5600T
Insert the paper into the paper charger
Wind the paper at the paper charger
Press the FEED button
Note : 1. Be sure to use roll paper that meets the specifications.
2. Do not use paper rolls which have the paper glued to the core because the printer cannot
detect the paper end correctly. However, if you will stop the printing using the optional paper
roll near-end detector, you can use glued type paper rolls.
3. Using scissors, cut the leading edge of the paper roll as shown blow.
( X )
9) Remove the side of the spool and insert the
end of the paper roll into the groove on the
spool
10) Then wrap the roll paper around the spool two
or three times.
11) Set the flange cover to flange shaft and set
the take-up spool to the take-up frame.
( O )
4 - 21
4. Operating Instructions
☜ Right paper condition>
Hide quick links:
Advertisement
Table of Contents
