HYOSUNG MoniMax 5600T Operator's Manual page 131

MoniMax 5600T
Error
Code
CS 14
400C700 initializing
operation.
CS 15
400C800 initializing
operation.
CS14 Dark detection during deliver
400CA00
reserved operation.
CS 15 Dark detection during deliver
400CB00
reserved operation.
Detected the remained notes on the
400CC00 sensors in front of cassettes during
re-driving.
Feeding time out due to jam (CS14)
400D000 around
delivery operation
Feeding
400D100 (CS14~15) around throat assembly
during delivery operation
Feeding
400D200 (CS10AB) around throat assembly
during delivery operation
The remaining notes on the tray
400D300 during delivery operation (some notes
remaining on CS10AB)
The remaining notes on the tray
400D400 during delivery operation (some notes
remaining on CS14)
Cause
Dark detection during
or dispense reserved
Dark detection during
or dispense reserved
throat assembly during
time out due to
time out due to
1. Remove the remaining notes and foreign objects at
the position of the CS 14 sensor
2. If error occurs when checking CS 14 disconnection
and operation, replace a sensor.
1. Remove the remaining notes and foreign objects at
the position of the CS 15 sensor
2. If error occurs after checking CS 15 disconnection and
operation, replace a sensor.
The same as #400C7 handling
The same as #400C8 handling
1. Remove a jammed note or foreign objects between
the throat and the tray
2. Check if the CS 14 sensor cable is disconnected.
3. Check the feed motor operation in the throat unit.
4. Exchange a sensor after abnormal operating the CS
14 sensor .
1. Remove a jammed note in the throat.
jam 2. Check external light source of the CS 15 sensor.
3. Check the feed motor operation in the throat unit .
4. If error occurs when checking CS 14 and CS 15
sensor operation, replace a sensor.
1. Remove a jammed note in the throat.
jam 2. Check external light source of the CS10 AB sensor.
3. Check the feed motor operation in the throat unit .
4. If error occurs when checking CS10 AB sensor
operation, replace a sensor.
The same as #400D2 handling.
1. Remove a jammed note in the tray
2. Check external light source of the CS14 sensor.
3. If error occurs when checking CS14 sensor operation,
replace a sensor
6 - 36
6. Appendix
Handling