HYOSUNG MoniMax 5600T Operator's Manual page 32

MoniMax 5600T
Fig.4.8
10) When password setting is completed, turn the change bar counterclockwise and remove it from
the safe as shown in the Fig.4.9 and Fig.4.10.
Fig.4.9
11) When password setting is completed, try to turn the dial more than a couple of
times while the door is open to see if the door is opened or not. (Make sure to run the open/close
test for at least two or three times.)
12) When all setting is completed, inform the password to the person in charge while paying attention
to password disclosure or lost.
Note: Special attention must be paid and lost dial number cannot be restored.
Note: Do not use number 25 – 35 as
the last password number.
4 - 7
4. Operating Instructions
Fig.4.10